Sarir Sanat Amir: Specialist Manufacturer of Solar Mounting Structures
Sarir Sanat Amir is a specialist group that uses advanced roll forming lines and is one of the largest manufacturers in Iran of steel profiles for solar mounting structures.
Our profiles are mainly designed and produced with C and U cross-sections to international standards such as EN 10025−2 (S235JR / S355JR), with mechanical properties suitable for use in a wide range of environmental conditions.
Types of Solar Structures by Application
| Category | Description |
| Ground-mounted structures | Suitable for medium and large-scale solar plants. Available in fixed and tracker models. |
| Rooftop structures | Used on industrial and commercial buildings, with a lightweight design and fast installation. |
| Carport structures | Combined structures for parking areas with solar panels mounted on the roof. |
| Industrial rooftop structures | Designed specifically for installing solar panels on industrial sheds and warehouses, taking their particular structural conditions into account. |
Structure Types by Design and Panel
Structure design:
- Fixed Tilt: a fixed mounting angle for maximum annual yield.
- Single/Double Axis Tracker: able to follow the path of the sun, ideal for high-irradiation regions.
Panel type:
- Monofacial panels: designed for single-sided panels that capture light on the front surface.
- Bifacial panels: designed to use light reflected from the ground so that more energy is captured from the back of the panel.
Technical and Quality Features of Our Profiles
Our profiles are designed to withstand the harshest environmental conditions and to secure the service life of your project:
| Property | Details |
| Base steel | S235JR / S355JR / DX51D / ZAM Steel |
| Thickness range | 1.5 to 5 mm |
| Surface coating | Hot-dip galvanized to ASTM A123, or ZAM coating (Zn−Al−Mg) in various coating masses |
| Resistance | High resistance to corrosion and severe environmental conditions. |
| Production accuracy | CNC punching and drilling, precise forming, length tolerance ±2 mm and cross-section tolerance ±0.5 mm. |
| Mechanical properties | Yield strength 235 to 355 MPa, ultimate tensile strength 360 to 510 MPa |
| Standards compliance | Full compliance with international standards such as EN 1090 and DIN 1055, and Iranian Plan and Budget Organization Publication 667. |
Profile dimensions:
- C profile: thickness 1.5 to 5 mm, web width 50 to 150 mm, flange 25 to 90 mm. Maximum length 13 m.
- U profile: thickness 1.5 to 5 mm, web width 50 to 150 mm, flange 25 to 90 mm. Maximum length 13 m.
- Punch types: round and slotted (oblong) holes, horizontal and vertical.
Sarir Sanat Amir Complete Services
Beyond manufacturing, we offer the following specialist services:
- Custom design and production of structures to suit your site location, panel specifications and project conditions.
- Production to customer drawings and technical specifications.
- Cutting, roll forming and punching to project requirements.
- Technical advice on choosing the best mounting system for your project.
- Supply of the raw material (steel coil) required for the project.
Quality Control and Packaging
Every stage of production, from raw material to punching and cutting, is inspected and documented by our quality control department using in-line inspection checklists. Finished profiles are shipped in neat, robust and secure bundles with a full specification label (type, size, traceability code, etc.).
With more than two decades of experience in producing open steel profiles, Sarir Sanat Amir is able to supply solar structure profiles in volume, with high quality, precision and on-time delivery.
For technical advice and sample sections, please contact our sales team.
Sarir Sanat Amir Solar Panel Structures at a Glance
Solar structure profiles and solar mounting structures are produced in Iran on advanced roll forming lines, delivering high-quality, durable products to international standards EN 10025-2 (S235JR / S355JR).
These profiles are mainly designed and made with C and U cross-sections in a variety of thicknesses and sizes, suitable for solar projects including large power plants, rooftop systems, carports and industrial sheds.
Solar structure profile | Solar mounting structure | Solar panel
Types of Solar Structures by Installation Site
- Ground-mounted structures: solar structure profiles for medium and large-scale projects, available in fixed and tracker models.
- Rooftop structures: for industrial and commercial buildings, with a lightweight design and fast installation.
- Carport structures: for parking areas, with solar panels mounted on the roof.
- Industrial rooftop structures: designed specifically for industrial sheds and warehouses, taking their structural conditions into account.
Structure Types by Design
- Fixed Tilt: a fixed mounting angle for maximum annual efficiency.
- Single/Double Axis Tracker: follows the path of the sun to increase yield.
Structure Types by Panel
- Monofacial panels: capture light on the front surface.
- Bifacial panels: capture light on both sides, using light reflected from the ground.
Technical Features of the Profiles
- Base steel: S235JR / S355JR / DX51D / ZAM Steel
- Thickness range: 1.5 to 5 mm
- Custom dimensions: to the customer’s design and order
- Surface coating: hot-dip galvanized to ASTM A123, ZAM coating (Zn-Al-Mg)
- High resistance: corrosion-resistant and durable in harsh environments
- Production accuracy: no deviation, distortion or twisting
Mechanical Properties
- Yield strength: 235 to 355 MPa
- Ultimate tensile strength: 360 to 510 MPa
- Elongation at break: at least 20%
Production Accuracy and Tolerances
- CNC punching: precise forming, suitable for bolted or welded assembly
- Length tolerance: ±2 mm
- Cross-section tolerance: ±0.5 mm
- Standards: EN 1090, DIN 1055, Publication 667, SATBA guidelines
Section Dimensions
C profile: thickness 1.5 to 5 mm, web width 50 to 150 mm, flange 25 to 90 mm, length up to 13 m.
U profile: thickness 1.5 to 5 mm, web width 50 to 150 mm, flange 25 to 90 mm, length up to 13 m.
Services
- Design and production of solar mounting structures to suit the site location and project conditions
- Production to customer drawings and technical specifications
- Custom cutting, roll forming and punching
- Supply of raw material (steel coil)
- Technical advice on choosing the best mounting system
Quality Control and Packaging
Every production stage, from raw material preparation to cutting and punching, is carried out under close supervision of our quality control department. Profiles are delivered in robust packaging with accurate labels showing type, size, quantity, production date and traceability code.
With more than 20 years of experience in producing steel profiles, Sarir Sanat Amir is ready to supply solar structure profiles in volume, with high quality and on-time delivery.
📞 For technical advice and sample sections, please contact our sales team.
Frequently Asked Questions about Solar Structures
What types of solar structures does Sarir Sanat Amir produce?
We produce profiles for ground-mounted structures (fixed and tracker), rooftop structures for industrial and commercial buildings, carport structures for parking areas and special structures for shed and warehouse roofs, designed for both monofacial and bifacial panels.
Which steel grades and thicknesses are used for solar structure profiles?
The base steel is S235JR, S355JR, DX51D or ZAM steel, with a thickness range of 1.5 to 5 mm in C and U sections.
What anti-corrosion coating do the structures have?
Profiles are supplied hot-dip galvanized to ASTM A123 or with ZAM coating (zinc, aluminium, magnesium) in various coating masses, so they resist severe environmental conditions.
How accurate is production and which standards apply?
CNC punching and drilling are carried out with a length tolerance of ±2 mm and a cross-section tolerance of ±0.5 mm, and the design complies with EN 1090, DIN 1055 and Iranian Plan and Budget Organization Publication 667.
How do I order or request a quote for solar mounting structures?
Send us your project drawings or specifications (installation type, number of panels and location) and we will send you a quote. Phone: +98 31 3107, or use the Sarir Sanat Amir contact page. The most widely used profiles for these structures are the C profile and U profile.